ABOX-ALULG Outdoor enclosure IP66

ABOX-ALULG is a hermetic enclosure designed for wall mounting. With an additional adapter, it can be installed on a pole or mast.

The enclosure is a convenient solution for preparing external buffer kits for 8 IP cameras and additional devices. It enables the creation of a distribution point configured to meet the specific requirements of the installation.

Inside the enclosure there is a mounting plate with a 10.8 mm hole pattern for mounting ATTE modules, which can be easily removed.

The enclosure can conveniently accommodate, among other things, an industrial switch, power supply, converter, main switch, and mini switch or fiber optic box. All components can be mounted on an aluminum mounting plate. 

Thanks to the appropriate number and size of cable glands, the enclosure allows for easy routing of power, fiber optic, and network cabling.

Protective conductors are routed inside the enclosure for connection to active devices.

Key features and functions:

• allows equipment installation using a dedicated 10.8 mm hole pattern.
• possibility of storing excess cables inside the enclosure
• lockable enclosure door
• high protection rating of IP66
• high-quality polymer gasket
• the special shape of the flange pressing on the seal ensures water is drained away, which is especially important in frosty conditions
• high resistance to ozone, oxidation, and acids
• high corrosion resistance, including in marine environments and industrial atmospheres
• almost three times lighter than the steel equivalent
• the enclosure has a grounding connection
• electrical continuity is ensured both through the conductive parts of the enclosure and via a separate protective grounding conductor

The ABOX series outdoor enclosures provide a convenient solution for protecting devices and cable connections installed in outdoor conditions. The available models come equipped with a mounting plate featuring specially designed holes in a 10.8 mm pattern. This layout is fully compatible with the mounting hole pattern of installation modules. The system design allows selected devices to be mounted vertically or horizontally in any perforated section of the mounting plate.

The enclosure comes with the following items:

2x Universal keys for the enclosure
4x Wall mounting rubber rings

The set includes cable glands, which must be installed by the user in the pre-prepared holes.

• 10 holes for M16 cable glands (pre-drilled)
• 1 hole for M20 cable gland (pre-drilled)

NOTE – If the enclosure is used for mounting electrical devices, it must be grounded. Use grounding straps or wires with a minimum cross-section of 6 mm². To prevent the grounding terminal from loosening, place a toothed washer between the grounding terminal and the clamping nut.