AUPS-70-240-XL1 Buffered SMPS 24V 3A 72W

Buffered switched-mode power supply, Vin 230 VAC, Vout 21.6...27.6 VDC, Iout 3 A, Ich 1 / 2 A, Pout 72 W, ABOX-XL1 outdoor enclosure (space for 2x7 Ah batteries).

Key features and functions:

• longer power backup time compared to traditional UPS-based systems
• energy savings and reduced enclosure heating thanks to the high power supply efficiency (90%)
• short-circuit protection (SCP), overload protection (OLP), over heat protection (OHP) and surge protection
• battery protection against: excessive discharge (UVP), overload and reverse polarity
• automatic switchover to battery operation in the event of mains power failure
• OUF and ACF open collector outputs for operation control and integration with other systems
• easy installation of additional modules with a 10.8 mm hole pattern
• possibility of storing excess cables inside the enclosure
• includes 4 brackets for mounting the enclosure without affecting the IP56 protection rating

Additional information:

• using an additional ASUC series converter allows the output voltage to be increased and adjusted to the installation requirements (e.g., 24/48/55 VDC)
• for receivers requiring a stable 12 VDC power supply, such as recorders and NAS drives, we recommend using an additional AVC or AVIC series stabilizing module
• it is recommended to use new batteries of the same capacity, with similar internal resistance, of the same brand and type, from the same production batch, and with a similar level of wear when connecting batteries in series

The AUPS series buffer power supply is designed for CCTV systems, access control systems, and alarm systems. It provides a convenient solution for supplying buffered power to receivers requiring uninterrupted operation during periodic mains outages. Using a buffer power supply significantly extends system runtime compared to a standard UPS.

AUPS-70-240-XL1 is designed to work with maintenance-free SLA batteries (gel and AGM).

The ABOX series outdoor enclosures provide a convenient solution for protecting devices and cable connections installed in outdoor conditions. High-quality plastic ensures resistance to UV radiation and other harsh weather conditions. The available models come equipped with a mounting plate featuring specially designed holes in a 10.8 mm pattern. This layout is fully compatible with the mounting hole pattern of installation modules. The system design allows selected devices to be mounted vertically or horizontally in any perforated section of the mounting plate.